DBOSS epoxy crystal sand manual
Name: DBOSS epoxy crystal sand
Model: DBOSS_ECS4L
Net content: 4L/ barrel.
Shelf life: 18 months
Packing specification: multi component barrel packing agent
Implementation criteria: GB/18583-2008
Main raw materials: water-based epoxy resin + quartz sand
Product Description:
DBOSS Epoxy Crystal Sand is a multi-component ready-mixed and water-based sealant, zero solvent, low VOC, soluble in water. The product contains colored quartz sand, which has a grinding texture after solidification. The color is firm and does not fade. Its decoration and practicability are obviously superior to the color sealant. It can thoroughly solve the problem of beautiful seam and dirty black of ceramic tile.
Scope of application:
1. Decoration of filling seams for various tiles, antique tiles, wood-lined tiles, cement tiles, cultural tiles, soft light rotation, mosaics, etc.
2. sunshine room, shower room, bathroom, balcony, swimming pool, flower bed, cultural wall and so on.
Product characteristics:
1. humid environment can be constructed without whitening.
2. waterproof, mildew proof, black prevention, anti fouling, abrasion resistance, acid and alkali resistance, aging resistance.
3. hard, high strength, frosted texture.
4. color is rich, matte, metal color, imported colored quartz sand, the color is firm and does not fade.
5. Water-based materials, health and environmental protection, non-toxic, tasteless, does not contain benzene, toluene, xylene, formaldehyde, nonylphenol.
6. Construction is convenient, can be filled, not collapse, not shrinkage, not falling, one-time molding, can be home DIY operation.
Product advantages:
1. The waterborne epoxy system has very high adhesion to many substrates. The cured coating has excellent corrosion resistance and chemical resistance, and has small shrinkage, high strength, good wear resistance, cold and heat resistance, excellent electrical insulation.
2. This product adopts imported colored quartz sand. The color is brighter, the color is more delicate, highlights noble and elegant temperament, and the decorative effect is more excellent.
3. Adopt imported high-end curing agent, the color of the product after application is thorough without impurities, long-term color, maintain good performance.
Instructions:
The seam of ceramic tile should be 2-5mm and the depth of filling should be at least 2.5mm.
1. filling. It can also be filled without filling, such as filling and so on. The sealant is completely dry and the depth of the seams is at least 3mm.
2. seams. Use a vacuum cleaner to clean the ceramic tile seams, clean the seams with towels on both sides, remove dust, oil stains and other pollutants, and clean the surface of the ceramic tile with a cleaning shovel.
3. harmonization. Remove all the objects in the color sand bucket and mix the three materials of A, B and C according to 1:1:2 ratio.
4. filling. Use the scraper to scrape some materials out and apply them to the mosaic, scrape the materials into the cracks, try to fill the full, pay attention to the construction process, the scraper should move in the direction of the mosaic diagonal or fan-shaped uniform. Each construction area should not be too large, so that each crack of the material is full, mosaic surface residual materials can be used to evenly smear rubber scraper, so that the material is fully covered with cracks.
5. clean. The first cleaning, the use of soaked water sponge for preliminary cleaning work, according to the circular line gently wipe the mosaic surface, operation time should not be too long, in order to avoid the material in the gap is erased. The second clean, clean the sponge with clean water, just keep wet, do not need too much water, wipe it again.
6. nursing. Below 25 degrees Celsius, dry at 3-5 hours, solidified basically in 24 hours, and solidified completely over 72 hours. Natural curing for 7 days. After 24 hours, avoid contamination, rain, water rushing, and avoid walking on the ground.
Usage restrictions:
1. products should not be exposed to acid-base substances for a long time.
2. The main function of the product is seam, the product has waterproof performance, but can not replace the toilet, kitchen and toilet waterproof.
Matters needing attention:
1. mixing must be sufficient, and no water or other substances can be added.
2. during construction, it is necessary to confirm that there are no loose attachments such as dust and oil dirt on the ground and crevice.
3. the residue of ceramic tile must be cleaned within 1.5 hours after sewing.
4. At room temperature of 25 degrees, the mixed sealant can be used for 20 minutes, and then gradually harden and can not be operated.
5. In order to achieve the best results, need to maintain for 7 days, avoid contact with acid and strong detergent, do a good job of dust prevention, pollution protection measures.
6. the curing time varies according to the environment. At room temperature, the initial curing time is about 8 hours, and complete curing takes 48 hours.
Safety matters:
1. This product is safe and harmless, generally do not need protective gear, in order to avoid allergic reactions, use masks and gloves.
2. Avoid staining other objects and clothes when used. If stained carelessly, it can be cleaned with clean water. If necessary, it can be cleaned with special cleaning agent dipped in cotton cloth.
3. stay away from children, prevent misuse and eat.
4. disposal of waste products should comply with local environmental standards.