DBOSS anion water porcelain king manual
Name: DBOSS anion water porcelain king
Model: DBOSS_SC400F
Net content: 400ml/ branch
Shelf life: 18 months
Packing specifications: 2 component seams, 50 containers / boxes.
Implementation criteria: GB/18583-2008
Main raw materials: waterborne epoxy resin + pigment
Product Description:
DBOSS anion epoxy water porcelain is a two-tube two-component water-borne sealant, no solvents, low VOC, soluble in water. The product adopts negative ion technology, can effectively remove formaldehyde and other decoration pollutants, and continuously purify the air. Its decoration and practicability are obviously superior to color sealant, which can thoroughly solve the problem of beautiful seams and dirty and black tiles.
Scope of application:
1. all kinds of ceramic tile, vitrified brick, quartz brick, Tao Banzhuan, mosaic, aluminum plastic board and other sealant decoration.
2. kitchen table, shower room, toilet, window sill, table and so on.
Product characteristics:
1. humid environment can be constructed without whitening.
2. waterproof, mildew proof, black prevention, anti fouling, abrasion resistance, acid and alkali resistance, aging resistance, easy to clean.
3. hard and brittle, high strength and good toughness.
4. color is rich, bright, matte, metallic color, imported cosmetics grade does not fade.
5. Water-based materials, health and environmental protection, non-toxic, tasteless, does not contain benzene, toluene, xylene, formaldehyde, nonylphenol.
6. Construction is convenient, can be filled, not collapse, not shrinkage, not falling, one-time molding, can be home DIY operation.
Product advantages:
1. Using negative ion formula technology, the product continuously releases negative ions, negative ions react with formaldehyde, benzene and other pollutants after decoration to produce carbon dioxide and water, thoroughly solve the problem of decoration pollution, purify the air, and healthy home environment.
2. Industrial pigments are generally used in sealant products on the market, while imported cosmetic grade high-end pigments are used in this product, with brighter colors, more delicate colors, highlighting noble, elegant temperament and better decorative effect.
3. Adopt imported high-end curing agent, the color of the product after application is thorough without impurities, long-term color, maintain good performance.
Instructions:
The seam of ceramic tile should be 2-5mm and the depth of filling should be at least 2.5mm.
1. filling. It can also be filled without filling, such as filling and so on. The sealant is completely dry and the depth of the seams is at least 3mm.
2. seams. Use a vacuum cleaner to clean the ceramic tile seams, clean the seams with towels on both sides, remove dust, oil stains and other pollutants, and clean the surface of the ceramic tile with a cleaning shovel.
3. stickers. If the tile is antique brick or hemp brick, the United States before the seam to paste paper, glazed tiles and other smooth flat bricks can not paste. Keep the surface and crevice of the tiles clean when they are pasted. Beautiful paper should be pasted on both sides of the gap. In order to ensure the effect of the cross, the construction of horizontal and vertical lines is recommended to be carried out 24 hours apart.
4. glue. The front end of the extruder is removed by 30cm to ensure that the mixture is evenly mixed. The diameter of the outlet should be smaller than the width of the gap. When glue is used, grasp the intensity and frequency so as to make the colloid flow evenly. The suitable temperature is 5- 38 degrees.
5. pressure seam. Concave joint: use special seam steel ball to pull along the brick end from one end to the other side, and keep it evenly. Flat seam: Draw the scraper or soft rubber board from one end to the other, keep the force uniform, and do not deviate from the beautified paper to prevent the surface of the ceramic tile from being polluted.
6. clean. If you use the beautiful paper technology, after 5-10 minutes, tear out the beautiful paper and wipe off the excess sewing agent. If the use of non-sticking paper technology, to wait for about 3-5 hours after the seam, with a cleaning shovel will be semi-solid tile surface sealant clean.
7. nursing. Below 25 degrees Celsius, dry at 3-5 hours, solidified basically in 24 hours, and solidified completely over 72 hours. Natural curing for 7 days. After 24 hours, avoid contamination, rain, water rushing, and avoid walking on the ground.
Usage restrictions:
1. products should not be exposed to acid-base substances for a long time.
2. The main function of the product is seam, the product has waterproof performance, but can not replace the toilet, kitchen and toilet waterproof.
3. because of the characteristics of epoxy resin, it is not recommended for outdoor or long-term contact with UV.
Matters needing attention:
1. Install a special mixing rubber nozzle, put on a special rubber gun, the rubber nozzle 30 cm before the use of glue, and then can be constructed.
2. during construction, make sure that the floor and gaps are not moist, and there are no loose attachments such as dust and oil stain in the crevice.
3. the residue of ceramic tile must be cleaned within 1.5 hours after sewing.
4. At room temperature of 25 degrees, the mixed sealant can be used for 20 minutes, and then gradually harden and can not be operated.
5. In order to achieve the best results, need to maintain for 7 days, avoid contact with acid and strong detergent, do a good job of dust prevention, pollution protection measures.
6. the curing time varies according to the environment. At room temperature, the initial curing time is about 8 hours, and complete curing takes 48 hours.
Safety matters:
1. This product is safe and harmless, generally do not need protective gear, in order to avoid allergic reactions, use masks and gloves.
2. Avoid staining other objects and clothes when used. If stained carelessly, it can be cleaned with clean water. If necessary, it can be cleaned with special cleaning agent dipped in cotton cloth.
3. stay away from children, prevent misuse and eat.
4. disposal of waste products should comply with local environmental standards.